Mount the microwave oven, Mount the microwave, Oven –22 – GE spacemaker xl1800 User Manual

Page 21: Installation instructions, Adapting microwave blower for recirculation, C4. 21, Mount the microwave oven c5

Advertising
background image

1

9

8

7

ADAPTING MICROWAVE
BLOWER FOR

RECIRCULATION

(continued)

C4.

21

Place the blower unit back into the opening.
CAUTION: Do not pull or stretch the blower unit
wiring. Make sure the wires are not pinched.

Replace blower plate with the screw removed in

Step 1.

Secure blower unit to microwave with the screw

removed in Step 4.

Attach the microwave oven to the top cabinet.

Cabinet Front

Cabinet Bottom Shelf

Filler Block

Microwave Oven Top

Equivalent to Depth
of Cabinet Recess

Back of

Microwave

Installation Instructions

3

2

Rotate front of oven

up against cabinet

bottom.

MOUNT THE MICROWAVE
OVEN

C5.

FOR EASIER INSTALLATION AND PERSONAL

SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.

IMPORTANT: Do not grip or use handle

during installation.

NOTE:

If your cabinet is metal, use the nylon grommet

around the power cord hole to prevent cutting of the

cord.

NOTE:

We recommend using filler blocks if the

cabinet front hangs below the cabinet bottom shelf.

IMPORTANT: If filler blocks are not used,

case damage may occur from over tightening
screws.

Insert a self-aligning screw through top center

cabinet hole. Temporarily secure the oven by

turning the screw at least two full turns after the

threads have engaged. (It will be completely

tightened later.) Be sure to keep power cord
tight. Be careful not to pinch the cord, especially
when mounting flush to bottom of cabinet.

NOTE:

When mounting

the microwave oven,

thread power cord

through hole in bottom of

top cabinet. Keep it tight

throughout Steps 1–3. Do

not pinch cord or lift oven

by pulling cord.

Lift microwave, tilt it

forward, and hook

slots at back bottom

edge onto four lower

tabs of mounting

plate.

Self-Aligning Screw

4

Advertising
This manual is related to the following products: