Installing the charcoal filter, Installation instructions – GE spacemaker xl1800 User Manual

Page 22

Advertising
background image

5

6

3

4

2

1

INSTALLING THE
CHARCOAL FILTER

C6.

MOUNT THE MICROWAVE
OVEN

(continued)

C5.

Install the charcoal filter. When properly installed,

the wire mesh of the filter should be visible from

the front.
Replace the grille and the 2 screws.
Close the door.

22

Charcoal
Filter

1400 Series Model

1600 and 1800 Series Model

Insert mesh-side down

Insert mesh-side up

On 1400 and 1600 Series models,

remove 2 screws

on front of grille using a #1 Phillips screwdriver.
On 1800 Series models,

remove 2 screws on top

front of grille using a #2 Phillips screwdriver.
Open the door.
Remove the grille.

Installation Instructions

8

7

6

Tighten the outer two screws to the top of the

microwave oven. (While tightening screws, hold

the microwave oven in place against the wall and

the top cabinet.)

Insert 2 self-aligning screws

through outer top cabinet

holes. Turn two full turns on

each screw.

Tighten center

screw completely.

Install grease filters. See the Owner’s Manual

packed with the microwave.

5

1400 and 1600 Series

1800 Series

Advertising
This manual is related to the following products: