Setting – Canon LV-S4 User Manual

Page 39

Advertising
background image

39

Setting

Logo PIN code lock Dialog Box

Pointer

Enter a Logo PIN code
Select a number by pressing the Point 7 8 buttons and fix the
number with the OK button. The number will change to "

✳". If

you fixed an incorrect number, move the pointer to "Set" or "Clear"
once by pressing the Point d

d button, then return to "Logo PIN

code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically
move to "Set". Press the OK button so that you can change the
Logo PIN code lock setting.

If you entered an incorrect Logo PIN code, "Logo PIN code" and
the number (

✳✳✳✳) will turn red and disappear. Enter a correct

Logo PIN code all over again.

After a correct Logo PIN code is entered, the
following dialog box will appear.

Select On/Off by pressing the Point 7 8 buttons or
change the Logo PIN code.

Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit number.
Select "Logo PIN code change" with the Point d

d button and press

the OK button. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand.

Setting

This function prevents an unauthorized person from changing the
Logo setting.

Off . . . . .the Logo setting can be changed freely from the

Logo menu. (p40)

On . . . . . .the Logo setting cannot be changed without the

Logo PIN code.

If you want to change the Logo PIN code lock setting, enter a
Logo PIN code along the following steps. The initial Logo PIN code
is set "4321" at the factory.

Logo PIN code lock

Logo PIN code lock

Note:

• If you forget your Logo PIN code and unable to change it, the Logo PIN code can be

reset to the factory default setting (4321) according to the following procedures.
When you reset the Logo PIN code, the PIN code and Key lock will be reset, as well.
1. Disconnect the AC Power Cord from the AC outlet.
2. As pressing the OK button on the projector, connect the AC Power Cord into an

AC outlet again. Keep pressing the OK button until the POWER indicator emits.

The Logo PIN code will be returned to the factory default setting while the Logo
PIN code lock state will remain the same as previous set state.

Advertising