Audiovox MVX501 - Manual (Page 11)

STORING IN THE MEMORY
You can store telephone numbers in the 25 memory loca­
tions. For each memory location, you can store a telephone
number of up to 32 digits.
Manual Storage
Telephone numbers can be stored manually into the memory
locations 01 to 25.
1. Press (@), then enter the telephone number.
2. Press ( f ^, <@). Entered phone number will flash.
3. Enter a 2-digit location number (01-25).The stored tele­
phone number will be displayed.
4. Press @).
Note: If the selected memory location number is already
used, the previous information will be overwrit­
ten.
Example: To store telephone No. 123-4567 in memory
location No. 11
1. Press @), then enter
(4^ (5^ (7^,
2. Press @)(5s).
3. Enter (iZ])(iZ) while the telephone
number is flashing.
4. Press (@) to clear the display.
m.iiii
I zt ZlUC C n
l ( ____ I I
Automatic Storage
You can automatically store telephone numbers in vacant
memory locations.
1. Press then enter the telephone number.
2. Press i@), (53), (£3).
The telephone number is automatically stored in the first
available vacant memory location.
The stored location will be displayed momentarily.
3. Press (c^.
18
Note: If there is no available location,'
displayed momentarily. In this case, choose a
memory location that you wish to overwrite with
the new information.
Example: To automatically store telephone No. 345-6789
in vacant memory
1. Press (cS), then enter (53(43)^13)
(6M^ (7P^ (8T^ ( 9 ^),
2. Press ( f ^C23)<23).
The telephone number will be A B
automatically stored in the vacant
memory location 12, for example.
1 1 f r c n n n
Z* fjiu
3. Press @).
Storage After Vacant Memory Location Search
You can search for unused memory locations for which tele­
phone numbers can be stored.
1. Press (^), then enter the telephone number.
2. Press ( f ^, (¿3).
3. Press C£) or (5^ to search for the desired vacant
memory location.
4. Press (¿3) to store in that memory location.
5. Press (£3)-
Example: To store telephone No. 456-7890 in a vacant
memory location
1. Press (c^, then enter
2. Press ( f ^
3. Press (T) or (V) to search for vacant
memory location.
4. Press (23).
5. Press
n.iill
UC
1^0 iO_'U
Notes: • To exit the Vacant Memory Location Search
function, press
• If there is no available location, “F ¿.'L L” will
be displayed momentarily. In this case, choose a
memory location that you wish to overwrite
with new information.
19