Audiovox MVX501 - Manual (Page 13)

PROGRAMMABLE ONE TOUCH EMER­
GENCY CALL
You can place an emergency call with (T^ key alone, even
when your phone is in lock and/or call restriction mode. 911
is the preset emergency number. You can reprogram this num­
ber with another number (up to 7 digits) if you wish. Also,
you can deactivate this feature to avoid an unintentional call
by mistake.
Placing One Touch Emergency Call
1. Press and hold for 2 seconds.
The pre-programmed emergency number will be dis­
played, and the IN
USE indicator will light as the call is
placed.
One Touch Emergency Call ON/OFF
1. Press (™c), ($3), (i^.
2. Enter the 3-digit Unlock code.
3. Press (X) to select “on”, or CX) to select “oF”.
4. Press (S^to store.
5. Press (
clb ) to clear the display.
Programming a New Emergency Number
1. Press @), (*D, (i^.
2. Enter the 3-digit Unlock code.
3. Enter a new emergency number (Max. 7 digits).
4. Press (53) to store.
5. Press (c^ to clear the display.
22
SCRATCH PAD MEMORY
As a sort of numerical note pad, you can enter up to 3 en­
tries in special memory locations (memory locations 26 to
28) of up to 32 digits each. Also, you can place a call from
the scratch pad memory. The 4th entry scrolls the scratch
pad memory and the number entered first is erased.
Note: Contents of the scratch pad memory will not be
cleared even if your phone is turned off.
Storing Numbers in the Scratch Pad Memory
1. Press (cS) and enter a number you wish to store (up to
32 digits).
2. Press <^, ( j Z).
Dialing Numbers in the Scratch Pad Memory
1. Press
2. Enter one of the location numbers (26 to 28).
Example: Enter to recall the last number en­
tered.
3. Press to initiate dialing.
EMERGENCY AND PRIORITY DIALING
You can store a single telephone number up to 32 digits for
emergency or priority purpose. The memory location 29 is
reserved for this purpose.
Storing the Emergency and Priority Number
1. Press then enter the telephone number.
2. Press (¿5/.
3. Enter (2^, (|Z) while the telephone number is flashing.
4. Press @) to clear the display.
Dialing the Emergency and Priority Number
1. Press (Zs), <9^.
2. Press (S^.
Note: The emergency and priority number will automati­
cally be redialed up to 3 times at 50 second inter­
vals or until a connection is made.
During redialing sequence, “Pr .or” will be dis­
played indicating that this feature is in operation.
23