Bolens LT-185 - Manual (Page 31)

LT-185
Model 696
REF.
NO.
PART
NO. DESCRIPTION
REF.
NO.
PART
NO. DESCRIPTION
1 618-0240 Blade Spindle Ass’y. 32 742-0644 Blade 16.28“ Lg.
2 783-0114A 46" Deck Ass’y. 33 748-0234 Shoulder Spacer
683-0067A 46" Deck Ass’y. Comp. (For Service) 34 750-0932A Spacer .635" I.D. x .088" O.D.
3 710-3151 Hex Bolt 5/8-18x4.25" Lg. 36 754-0440 V-Belt
4 710-0428 Hex Bolt 1/4-28 X 1.25" Lg. 37 754-0439 V-Belt
5 710-0459A Hex Bolt 3/8-24 X 1.5" Lg. 38 756-0638 Pulley Double Deck 5" O.D.
6 710-1039 Hex Bolt 3/8-24 x 1" Lg. 39 756-0627 Flat Idler Pulley 3.5 O.D.
8 710-0599 Hex Wash. Hd. TT-Tap Scr.1/4-20 x .5" 40 783-0046 Idler Deck Bracket
g 710-0151 Hex Bolt 3/8-24 X 2" Lg. 41 783-0063A Belt Cover L.H.
10 710-1260A Hex Flange Bolt 5/16-24 x .75" Lg. 42 17116 Deck Brake Brkt. Ass’y.
11 712-0417A Hex Flange L-Nut 5/8-18 Thd. 43 17258A Belt Cover Brkt. R.H.
12 711-0993 Belt Guard Pin 44 710-0258 Hex Bolt 1/4-20 X. 62" Lg.
13 712-0138 Hex Nut 1/4-28 Thd. 45 711-0792 Hinge Pin
14 712-0429 Hex Ins. L-Nut 5/16-18 Thd. 46 736-0270 Beil-Wash. 1/4" I.D.
15 712-0241 Hex Nut 3/8-24 Thd. 47 732-0602 Torsion Spring
16 712-3006 Hex Nut 1/4-20 Thd. (Gr. 5) 48 703-1693 Hinge Mtg. Brkt.
17 712-0181 Hex Top Jam Nut 3/8-16 Thd. 49 726-0106 Push Nut
18 712-0158 Hex Center L-Nut 5/16-18 Thd. 50 731-1032 Chute Ass’y. Comp. (Incl. Ref. 45, 47, 48,
19 716-3020 Int. Snap Ring 49. 50)
20 732-0594A Ext. Spring .88" O.D. x 6.17" 51 750-0960 Spacer .635" I.D. x1" O.D.
21 732-0723 Ext. Spring .788" O.D. x 15.5" 52 736-0158 L-Wash. 5/8" I.D.
22 734-0973 Deck Wheel 53 712-0337 Hex Nut 5/8-18 Thd.
23 736-0290 FI-Wash. .635" I.D. X 1" O.D. x.06" 54 710-0167 Carriage Bolt 1/4-20 x .5" Lg.
24 736-0329 L-Wash. 1/4" I.D.* 55 712-0271 Hex Sems Nut 1/4-20 Thd.
25 736-0331 Bell-Wash. 3/8" x 1.125" x .062" 57 736-3088 F!-Wash. .635" I.D.
26 736-0105 Bell-Wash. 3/8" X .87" x .064" 58 783-0141 Center Deck Skirt
28 738-0347 Shoulder Spacer .625" I.D. x .169" 59 783-0142 R.H. Deck Skirt
29 738-0373 Shid. Bolt .498" x 1.525" 60 738-0999 Return Spring Stud
30 741-0524 Ball Brg. .625" I.D. x 1.574" O.D. x .47" 61 16606 Retainer Hook Bracket
31 742-0645 Blade 14.88" Lg. 62 712-3027 Hex Lock Nut 1/4-20
IMPORTANT: For a proper working machine, use Factory Approved Parts.
V-BELTS are specially designed to engage and disengage safely. A substitute (non OEM) V-belt can be dangerous
by not disengaging completely.
NOTE: For painted parts, please refer to
the list of color codes below. Please add the
applicable color code, wherever needed, to
the part number to order a replacement part.
For instance, if a part, numbered 700-xxxx,
is painted Oyster Gray, the part number to
order would be 700-xxxx-0662.
Oyster Gray: 0662
Powder Black: 0637
31