Bunn – Bunn BT10 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using the Phillips screwdriver,
replace the four screws that
secure the pour-in bowl.
Replace the top lid by inserting the tab into the rear of the
pour-in bowl ^rst, then replace the two mounting screws.
Wait 15 minutes for reheating before brewing coffee.
Note: Be sure to re^ll the water reservoir if you emptied it prior to performing
the installation (Refer to your owner’s manual for filing instructions).
Please call 1-800-385-2652 should you have any questions
about the installation of your Protective Shield.
BUNN
Advertising