Configuration (stand-alone modes), Timer mode, Volume mode – Chauvet DJ Equipment User Manual
Page 10
Page 10 of 16
Arena™ Hazer 3 User Manual (Rev. 02)
Configuration (Stand-alone Modes)
Timer Mode
To enable the Timer mode, do the following:
1. Connect this product to a suitable power outlet
2. Turn this product on.
3. Press
<FUNCTION> repeatedly until Interval Set shows on the display.
4. Use
<UP> or <DOWN> to select the time in between haze.
5. Press
<FUNCTION> repeatedly until Duration Set shows on the
display.
6. Use
<UP> or <DOWN> to select the duration of haze.
7. Press
<FUNCTION> repeatedly until Timer Out shows on the display.
8. Use
<UP> or <DOWN> to select the volume of haze.
9. Press
<FUNCTION> repeatedly until Fan Speed shows on the display.
10. Use <UP> or <DOWN> to select fan speed. Setting this to OFF will
disable the fan in Timer Mode.
11. Press <TIMER> to activate the mode with the above settings.
Volume Mode
To enable the Volume mode, do the following:
1. Connect this product to a suitable power outlet
2. Turn this product on.
3. Press
<FUNCTION> repeatedly until Volume Out shows on the
display.
4. Use
<UP> or <DOWN> to select the volume of haze.
5. Press
<FUNCTION> repeatedly until Fan Speed shows on the display.
6. Use
<UP> or <DOWN> to select fan speed. Setting this to OFF will
disable the fan in Volume Mode.
7. Press
<VOLUME> to activate the mode with the above settings.