Last rescan sid indicator, Multiple city registration, Automatic calls in absence indicator – Audiovox MVX-430 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

' Standard Mode

The unit will scan the preferred system channels. If

unable to find an acceptable preferred channel, the
unit switches to scan the non-preferred channels.

' Home Only Mode

You can place or receive calls only within your home

area.

Preferred System Only Mode

The unit will scan the preferred system only and
prevents switching over to the non-preferred system.

' Non-preferred System Only Mode

The unit will scan the non-preferred system only.

LAST RESCAN SID

INDICATOR

This feature permits you to recall the last system iden­

tification accessed by your phone.

Press @), then (©,

The last rescan SID is displayed on the readout for 5 sec.
The display format is as follows:

R d T - l x l x i x i x i j ^

If the iNOSvg indicator is on, the display will show

MULTIPLE CITY

REGISTRATION

Some cellular users find it beneficial to register then-
phone in multiple cities, rather than rely on “roam”. The

multiple city registration feature permits you to repro­
gram from the telephone unit, the different phone num­

bers for the cities in which you are registered. Each

programmed phone number will be designated as your

home system.

Press and enter the new system ID number (5 digits)

followed by the corresponding phone number (10 digits).
Please include your area code. You must register your
unit with the carrier in order to get both the system ID
number and your phone number.

Press ® then key (©. Your new phone number will be
displayed on the readout. (Holding down ©, to display

your new system ID number.)

Note: (1) System ID number and phone number can

not be programmed during a call.

(2) Calls are placed or received using only the

programmed phone number, in use at the time
of call.

AUTOMATIC CALLS IN

ABSENCE INDICATOR

This feature indicates the niimber of unanswered incom­
ing calls. If incoming calls are unanswered, the unit will
indicate the following.

\ R \

XX

I X| Xlis the number of calls (01 to 99) missed. Depressing

any key (other than the Power Key) wUl dear the number
of calls indicated in Display. However, the ntnuber of
calls will remain if the unit is turned off.

29

30

Advertising