Bolens 116-312-000 - Manual (Page 7)

18.
FIGURE 9.
19.
20
.
Secure brake and throttle cables to the left side
of the handle as follows.
A. Insert plastic cable anchors (G) into holes pro­
vided on the inside of the lower handle, one
near the top and one near the bottom of lower
----- handle. See figure 9A.
B. Slip cable ties (F) through cable anchors so
the teeth in the cable tie will be against the
handle (smooth side is away from the handle).
See figure 9B.
C. Secure the cables with the cable ties. See
figure 9C.
D. Cut off excess ends of cables ties.
Insert plastic plugs (H) into holes in the top rear
of the deck by slipping one end of plug into hole,
then pressing down on the other end of plug.
Check all nuts and bolts for correct tightness.
Grass Catcher Assembly
There are two different types of grass bags, bags with
and without flip top openings. Follow the instructions
which pertain to your unit.
1. Grass Bags with Flip Top Opening:
a. Attach bag to rear frame by inserting one end
of frame into pocket from inside bag. See figure
------- 10A.
b. Thread all material on one side of frame before
working it around the frame.
c. After threading, both ends of frame should be
inside the bag. See figure 10B.