Bernina 740E User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3*Step Zig-zag
Sewing on lace and elastic, darning,
mending, reinlorong edges.
Set the machine as illustrated. (1)
Place patch in position. The stitch
ler>gth can be shortened to produce
very close stitches. (2)
When mending tears, it is advisable
to use a piece ot backing fabric to
reinforce. The stitch density can be
varied by adjustir>g the stitch lertgth.
First sew over the centre and then
overlap on both sides. Oeperxfing on
the type of fabric and damage, sew
between 3 and 5 rows. (3)
54
Advertising
This manual is related to the following products: