Bolens 131-730A - Manual (Page 14)

5. Remove the lower idler by taking out the
center bolt and nut.
FIGURE 18.
3. Remove the transaxle belt guard by removing
the two self-tapping screws. See figure 19.
4. Unhook the V-belt from the transaxle pulley.
NOTE
When reassembling the idler be
sure to place the belt keeper in the
correct position. See figure 20.
6. Unhook the idler spring so the idler will swing
out of your way.
FIGURE 20.
FIGURE 19.
7. Remove the cotter pin from the clutch shaft
and pull it out of the bracket. See figure 21.
8. Remove the upper idler.
14