Handle identification, Handie identification – Bolens 111-064A User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
HANDLE IDENTIFICATION
Hairpin (T) Handle
The hairpin (T) handle will mount to
the deck with shoulder bolts, nuts
and lock washers.
For
models
with
remote
throttle
control, there is one longer bolt for
throttle
control.
See
figure
1
reference letter (C).
Loop Handle
The loop handle may mount to the
deck in one of two ways.
a.
Shoulder bolts, nuts and lock
washers.
b.
Handle brackets on deck held
by
two
hairpin
cotters.
See
figure 2 reference letter (S).
Loop handles may be assembled in
two ways.
a.
Non-folding with curved head
bolts and nuts.
b.
Folding-type with curved head
bolts and hand knobs.
Advertising