Black & Decker 7154 - Manual (Page 6)

ACCESSORIES
Recommended accessories for use with your Drill are listed below and in Black &
Decker
Home Products catalogs (CAUTION; The use of any other accessory or
attachment might be hazardous). For safety in use, the following accessories should
be used only in the sizes specified below:
BITS, METAL DRILLING - Up to
1
/
4
" with DRILL, up to 3/g" with Ya" DRILL.
BITS, MASONRY DRILLING - Up to
1
/
2
".
BITS WOOD DRILLING ~ Up to
1
/
2
" with V 4 " DRILL; up to V 4 " with Y q " DRILL.
HOLE SAWS - Up to li/s" with V 4 " DRILL; up to I
1
/
2
" with Ya" DRILL.
WIRE BRUSHES - Up to 3" diam. GRINDING WHEELS -- Up to 2" diam.
BUFFING WHEELS - Up to 4" diameter.
BACKING PADS-4%" diameter. SANDING DISCS & POLISHING BONNETS up to
5" diameter.
We strongly recommend that your first purchase be the No. U-2106 Safety Glasses
which should be worn when using all drill accessories.
CLEANING & LUBRICATION
Use only mild soap and a damp cloth to clean the tool. Many household cleaners
contain chemicals which could seriously damage the plastic. Also, do not use
gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar products.
Self lubricating bearings are used in the tool and periodic relubrication is not
required. However, it is recommended that, once a year, you take or send the tool
to a B&D Service Center for cleaning, inspection, and lubrication of gear case.
IMPORTANT
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment,
(including brush inspection and replacement) should be performed by Black &
Decker Service Centers or other qualified service organizations, always using Black
& Decker replacement parts. When servicing Double-Insulated Tools, USE ONLY
IDENTICAL REPLACEMENT PARTS.
RAPID EXCHANGE CONSUMER SATISFACTION GUARANTEE
MOST BLACK & DECKER CONSUMER PORTABLE POWER TOOLS AND LAWN AND
GARDEN PORTABLE POWER TOOLS ARE GUARANTEED FOR ONE YEAR FROM
DATE OF PURCHASE. IF ONE OF THESE PRODUCTS FAILS TO OPERATE TO YOUR
COMPLETE SATISFACTION, IT WILL BE REPLACED FREE OF CHARGE WHEN
RETURNED TO THE SELLER (IF A PARTICIPATING RETAILER) OR TO A BLACK &
DECKER SERVICE CENTER.
in returning a tool for replacement, proof of purchase is required and all original
standard equipment must also be returned (for example, chuck, chuck key, auxiliary
handles,
circular saw blades). Expendable original equipment such as sanding
sheets, belts and discs and jig saw blades need not be returned. For kits and
assortments only the basic power tool will be replaced.
This Satisfaction Guarantee Rapid Exchange does not cover Commercial Duty tools,
home workshop tools used in commercial service, lawn mowers, stationary tools,
tools used In rental service or accessories. On these products a one year guarantee
on defects will apply, excluding accessories.
ONE YEAR GUARANTEE
Applicable to products not covered by the Rapid Exchange Consumer Satisfaction
Guarantee: Commercial Duty Tools, Home Workshop Tools used in Commercial
Service, Stationary Tools, Lawn Mowers, and Tools used in rental service.
Black & Decker guarantees for one year from date of purchase to correct by repair
or parts replacement without charge any product defect due to faulty material or
workmanship in Commercial Duty tools, home workshop tools used in commercial
service, stationary tools, lawn mowers or tools used in rental service. Simply return
the cmplete unit, transportation prepaid to any Black & Decker Service Center or
Authorized
Service Station. Black & Decker assumes no responsibility for damage
or faulty performance caused by misuse, careless handling or where repairs have
been made or attempted by others.
No other guarantees, written or verbal, are authorized.
THE BLACK & DECKER MFG. CO.
Towson, Md. 21204, U.S.A.
Form No. 97303-01 (MAY74-AL) Printed in U.S.A.
S«9*T®ils-£lictrle'
—¥sil®w Pages—
ferSer¥ie§li Sales