Custom audio adjustment, Super t-bass system, Volume control – Aiwa AV-D25 User Manual

Page 8: To mute the sound temporarily, Sound adjustment during recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I

CUSTOM AUDIO ADJUSTMENT

T-BASS

VOLUME

SUPER T-BASS SYSTEM

The T-BASS system enhances the realism of low-frequency

sound.

Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the

three levels, or the off position to suit your preference.

L-ao

»iBitASt—vigaSEta-

(cancel)

VOLUME CONTROL

Turn the VOLUME control on the unit, or press the VOLUME

buttons on the remote control.

The volume level is shown on the display for four seconds. It
can be adjusted between 0 and MAX (31). It flashes when being
set over the level 21.

The volume level remains memorized even after the power is
turned off. However, if the power is turned off when the volume

is set to more than 17, it is automatically set to 16 the next time

the power is turned on.

To adjust the left/right balance of the front speakers

Press the BALANCE button to display “L/R OdB”. Then press

the DOWNT or UPA button repeatedly within four seconds.

Note that the front speakers balance of the 5.1 CH and Dolby
Pro Logic modes is also changed.

To mute the sound temporarily

Press the MUTING button (-20 dB).

“MUTE ON” appears on the display for four seconds. While

muting the sound, the selected function indicator flashes. Press

the MUTING button again to restore the sound.

Low-frequency sound may be distorted when the T-BASS system

is used for a disc or tape in which low-frequency sound is

originally emphasized. In this case, cancel the T-BASS system.

SOUND ADJUSTMENT DURING

RECORDING

The output volume and tone of the speakers or headphones

may be freely varied without affecting the level of the recording.

7

ENGLISH

Advertising