Audiovox LCM5620PKG User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lay the flaps of headrest material down into the
recess and Insert the clamshell Into the recess.
Check for fit. If It does not fit properly, you may
need to remove some more foam.
NOTE: The clamshell will need to be secured
to the headrest, either by using tie straps,
screws, ect..
Remove the clamshell and insert the IR trans-
miller and plug into the IR transmitter board.
Reinsert the clamshell into the recess and
secure using lie wraps or saews
plug the remaining connector into the monitor.
Turn the monitor around and insert It into the
ciamshetl housing. Snap into place.
Conned the wiring to the video system and
test.
-b-