AEG 155 D User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing
— Disconnect the unit from the mains power supply,
the light
— Remove my cover
bulbs
— Replace the old light bulb with a new light bulb (40 W max.).
— If the light does not come on, make sure the bulb has been
screwed in correctly before contacting the technical assist
ance service.
Cleaning
Warning: always disconnect the hood from the mains power
supply before cleaning it.
Never insert pointed objects in the motor’s protective grille.
Wash the outside surfaces using a delicate detergent solution.
Never use caustic detergents or abrasive brushes or powders.
Only ever clean the switch panel and filter grille using a damp cloth
and delicate detergents.
Attention!
Attention! Failure to observe the instructions on cleaning the unit
and changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
40