ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS - Manual (Page 20)

Quick Start (cont’d)
EXERCISE: TURN ON BURGLARY PROTECTION
Enter your ID code and observe Action Menu 1. Press Turn on.
Choosing this enables you to turn the group(s) on in either the AWAY
or STAY mode. Once you select the mode, you can scroll through your
burglary groups using the
Previous and Next selections. Try it. To
turn specific groups on, press the key to the right of the group name
when that group’s identification is displayed. To turn on all groups,
press
All. Press Quit to return to Action Menu 1.
Action Menu 2
► ◄ ? Enter choice: ◄
► ◄ See points Test ► ◄
► Change close time ► ◄
► ◄ Previous More ► ◄
Action Menu 2 has three feature selections:
• See points - Displays the number, description and current status of
each protection point.
• Change close time - Changes the close (system on) time of protection
groups.
• Test - Takes you to the Test Submenu for testing of protection groups,
points, holdup devices, and/or the bell and display.
EXERCISE: SEE POINTS
From Action Menu 2, choose See points to enter a submenu. Press
Supervisory, Burglary, Holdup, or Fire (depending on services being
provided). If Burglary is selected, select which group. Press
Installed.
This will show you the first point of the selected service. If there is
more than one point in this service, press
Next to see the next point.
NOTE: Next and Previous will not be displayed if there is only one
point in that service. Press
Quit to return to Action Menu 2.
20