System operation (confd) – ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System Operation (confd)
Sending Messages to a Pager
The FOCUS® 200 PLUS system can transmit messages to up to 8 paging
services (typically one for each group). The types of messages are divided
into 4 categories: System Troubles, Point Troubles, Alarms and Open/Closes.
Additionally, the system can be programmed to attempt to dial the paging
service either once or twice (the default is twice).
The format of the pager message is as follows:
FEE GGG UUUU
EEE = Event Code
GGG = Group Number (001-008)
UUUU = User Number (for open/closes) or Point Number.
The possible event codes are:
111= Fire Alarm
500 :
222 = Hold-up or Hostage Alarm
555 ^
333 = Burglary Alarm
777 ^
400= Group failed to Turn OFF
911:
444 = Group was Turned OFF
The following is an example of a pager message:
444 001 0025 ^ Group 1 was turned OFF by user 25.
Group Failed to Turn ON
Point or System Trouble
Group was Turned ON
Personal Emergency (Medical
Alarm)
70