Dish Network EZ Remote - Manual (Page 6)

4
C ONNECTING Y OUR S ATELLITE R ECEIVER AND TV
Figure 2. Connect the Satellite Receiver and TV
1. Connect a coaxial cable between the TV Set Out on
the satellite receiver and the tuner input on the TV
(see Figure 2).
Note : If you connect your TV a different way (for
example, using yellow, red, and white audio/video
RCA-type or S-Video cables), the feature to switch
your TV to satellite programming using
will
not work.
2. Set on the back of the receiver to CH3 .
Note : If you prefer Channel 4, instructions are
provided later to change this setting.
Note : If your satellite receiver does not have a ,
see your satellite receiver’s User’s Guide for how
to set
TV Set Out on the satellite receiver to
Channel 3.
Step 2 Step 1