Aquapro Fish Feeders ATX User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INCLUDED PARTS
1
) Directional Power
Control Unit (1)
2
) Mounting Bracket (attached) (1)
3
) Clear Disbursement Chute (1)
4
) Directional Digital Timer Unit (1)
5
) Top Mounting Plates (2)
6) 8MM
X
%” bolt (4)
7
) 8MM
X
%” Sheet Metal
Screw (4)
8
)
8MM
X
%” Self Tapping
Screws (4)
REQUIRED TOOLS
1
) 8MM Nut driver
2
) Pliers
3
) Cordless or Electric Drill
(if necessary)
4
) Vs" drill bit
(if necessary)
5
) V4” drill bit
(if necessary)
6) Pen/Marker
(if necessary)
7
) 1V2”-2” Hole Saw
(if necessary)
PAGE 2
ASSEMBLY INSTRUCTIONS
1
Verify the contents of the package against the
included parts list. If you are missing any parts
from the list, please contact BA Products immediately
at the toll-free number provided.
2
Remove contents of directional power control
unit box.
3
Turn the box so that the disbursement
opening is facing away from you. (clear side)
(Illustration A)
IF MOUNTING ON A AQUA PRO POLY
BARREL.
4
Locate and align one of the Top Mounting plates
with the mounting holes in the top of the unit.
5
Locate and align one of the Top Mounting plates
with the mounting holes in the top of the unit.
(Illustration B)
6
Repeat step 5 for the other side of box.
(Illustration B)
PAGE 3