Specifications, Xia3145 operation – Dual XIA3145 User Manual
Page 10
10
XIA3145
OPERATION
Specifications
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/-0.2V, 20Hz~20kHz)
Power Output:
100 Watts RMS x 2 channels at 4 ohms and < 1% THD+N
Signal to noise ratio:
74dBA (reference: 1 watt into 4 ohms)
Additional power output:
145 Watts RMS x 2 channels at 2 ohms and < 1% THD+N
290 Watts RMS x 1 channel at 4 ohms (bridged) and < 1% THD+N
Dynamic power:
580 Watts at 4 ohms
Speaker output impedance:
2~8 ohms (stereo), 4~8 ohms (bridged)
illuminite output voltage:
12VDC
illuminite output current:
2 amp
Low level input range:
200mV~6V (10k ohms)
High level input range:
2V~10V (100 ohms)
Bass boost:
0~12dB @ 45Hz
Crossover range:
40~400Hz
Crossover slope:
12dB/octave
Power supply:
11-16 VDC, negative ground
Fuses:
20 amp ATO x 2, 2 amp ATO x 1
Amplifier dimensions:
16.02" x 2.36" x 9.65" (WxHxD)
(407 x 60 x 245 mm)
Typical installation dimensions:
17" x 3.5" x 10.5" (WxHxD)
(432 x 89 x 267 mm)