Aiwa CX-NMT50 User Manual

Cx-nmt, For nsx-mt55 and nsx-mt50

Advertising

Table of contents

Document Outline

ENGLISH
PRECAUTIONS
- Installation
- Electric Power
- 3 AC power cord
TABLE OF CONTENTS
SEniNG UP
- Check your system and accessories
- Owner’s record
- POSITIONING THE SPEAKERS
  - ® Front speakers @ Center speaker
- CONNECTIONS
- CONNECTING AN OUTDOOR ANTENNA
  - To mount the surround speakers on the wall
  - To connect the supplied TS-W35 (only for NSX-MT55)
REMOTE CONTROL
- Inserting batteries
- When to replace the batteries
- Using the remote control
BEFORE OPERATION
AUDIO ADJUSTMENTS
- To turn the unit on
- DEMO (Demonstration) mode
- Illumination guides
- Flash window
- To turn the unit off
- VOLUME
  - Turn the VOLUME control on the main unit, or press the VOLUME buttons on the remote control.
  - To change the left/right balance
- BBE SYSTEM
- SUPER T-BASS SYSTEM
DSP SURROUND SYSTEM
- Press one of the GEQ buttons.
- To cancel the selected mode
- To select with the remote control
- Press one of the SURROUND buttons.
- To select with the remote control
- When the music source is monaural
- To cancel the selected mode
- To adjust the volume of the surround speakers
MANUAL TUNING
PRESETTING STATIONS
- <
  - When an FM stereo broadcast contains noise
  - To change the AM tuning intervai
- PRESET NUMBER TUNING
BASIC OPERATIONS
- LOADING DISCS
  - Press the CD button, then press the ±. OPEN/ CLOSE button to open the disc compartment. Load disc(s) with the iabei side up.
  - To piay one disc only, press one of the DISC DIRECT PLAY buttons.
- PLAYING DISCS
  - To play all discs in the disc compartment, press the ◄ ► button.
- RANDOM /REPEAT PLAY
BASIC OPERATIONS
- 1 Press the TAPE button and press the ± EJECT mark to open the cassette holder.
- 2 Press the button to start play.
  - To select a reverse mode (deck 2 only)
- MUSIC SENSOR
CONTINUOUS PLAY
- 1 Insert tapes into deck 1 and deck 2.
- 2 Press the TAPE/DECK1/2 button to select the deck to be played back first.
- 3 Press the REV MODE button to select Z).
- 4 Press the button to start playback.
BASIC RECORDING
- INSERTING BLANK SPACES
DUBBING A TAPE MANUALLY
DUBBING THE WHOLE TAPE
- ;z
  - Q
- ir
  - IJ
- ir
  - To stop dubbing
  - To stop dubbing
Al EDIT RECORDING
- 1 Insert the tape into deck 2.
- 2 Press the CD button and load the disc(s).
- 3 Press the CD EDIT/CHECK button once.
- 4 Press one of the DISC DIRECT PLAY buttons to select a disc.
- 5 Press the ◄◄ or ►► button to designate the tape length.
- 6 Press the # REC/REC MUTE button to start recording.
- To stop recording
- To check the order of the programmed track numbers
- To add tracks from other discs to the edit program
- Time on cassette tapes and editing time
PROGRAIVIIVIED EDIT RECORDING
- To stop recording
- To check the order of the programmed track numbers
- To change the program of each side
- To clear the edit program
ADJUSTING SPEAKER LEVEL BALANCE
65 .
- About the channels
- To change the delay time
- PLAY WITH DOLBY PRO LOGIC
  - To change the sound levels during playback
  - ADDITIONAL DOLBY PRO LOGIC MODES
    - To select PHANTOM or 3 CH LOGIC
- ]
c
- ]
c
- ]