Section 6, Troubleshooting – NewAir AI-210 Series User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 6
£6.:1t:PR;OiÉÌEMS|
TROUBLESHOOTING
APixiiti.
!l|BjÉÉ|GA"te:E®
r:bd;;jiit;vííM'a’-í^
“U” symbol is flashing
Lack of Water
Stop the ice maker and fill water
“0” svmbbi is disDiaved
Ice basket is full
Remove ice from ice basket
symbol is displayed
Ice shovel cannot rotate.
Check if ice-cubes are blocking the
ice-shovel. Otherwise, contact
supplier
‘iiili" symbol flashes for 20
seconds
Ice-full detecting sensor ie
faulty
Please contact supplier
Ice cubes stick together.
The ice making cycle is too
long
Stop the ice maker and restart after
the ice blocks melt. $eiect the small
ice size
Water temperature in
reservoir is too low
Change.the water in the reservoir.
Use water between 45T - 90^F
Ice making cycle is normal
but no Ice is made.
Ambient temperature or
water temperature in
reservoir is too high.
Ambient temperature should be
below 90T and use colder water
Refrigerant liquid leakage.
Contact supplier
Pip© in the cooling system is
blocked.
Contact supplier
E T / T T : 3 6 e d
S99000S17TÍT :°1
d31bM ^ aib:i^0JJ
S0:G0 i00a-69-Nnr