NewAir AI-210 Series - Manual (Page 9)

SECTION 5 OPERATING YOUR ICE MAKER
.^'ír/ívÎË"''^,,; lU, -J 4'.M. .il ^JlJ■.i,Mii";^'"ii''‘'nj\¡"¡"'^\'
How to set ON-TIMER program
When the unit is off* you can set the unit to start in x number of hours:
1
.
M
will flash in the Timer
2,
Press the TIMER button on the control panel. Timer indicator,
Set window.
Press the SELECT button to change the timer delay to your desired number of hours, from
1.0 to 18 hours, and back to 0.5, 1,0 hours. Each press is an increment of 0.5 hours.
3. A few seconds after releasing the buttons, the time digit will display the set time Invariably.
This means the TIMER has been sat. With tima passed, the digit will decrease by 0.1 hour,
4. When the digit decreases to sero and disappears, the unit will start to run automatically
according to your settings.
To cancel
To cancel ON-TlMER, press the TIMER button twice.
How to üet OFF-TIMER program
When the unit is on, you сап set the unit to stop in x number of hours;
1 .
Шн
will flash in the Timer Press the TIMER button on the control panel. Timer indicator,
Set window.
2. Press the SELECT button to change the timer delay to your desired number of hours, from
1.0 to 18 hours, and back to 0,5.1.0 hours. Each press Is an increment of 0-5 hours.
3. A few seconds after releasing the buttons, the time digit will display the set time invariably.
This means the TIMER has been set. With time passed, the digit will decrease by 0-1 Hr,
4. When the digit decreases to zero and disappears, the unit will stop running automatically.
To Cancel
To cancel OFF-TiMER, press the TIMER button twice.
£T/6:36ed
S99000SI7TÍT :01
а31ЬМ ^ dIb:^oJj S0:60 ¿003-63-МПГ