Aiwa AV-D55 - Manual (Page 15)

PRESEniNG STATIONS
■ Numbered
buttons
TUNER
BAND
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Turn the FUNCTION selector to select the TUNER
function, and press the VIDEO 1/5.1 CH/BAND
button repeatedly to select the desired band.
Then press the UP or DOWN button to select a
station.
2 Press the ENTER button to store the station.
A preset number assigned to the station, beginning from 1 in
consecutive order for each band, is displayed for two seconds.
1 Turn the FUNCTION selector to select the TUNER
function, and press the VIDEO 1/5.1 CH/BAND
button repeatedly to select a band.
2 Turn the MULTI JOG to select a preset number.
To clear a preset station
Select the preset number of the station to be cleared. Then, presss
the ENTER button, and press the ENTER button again within
four seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
When using the remote control
Press the TUNER BAND button to select a band, then press the
numbered buttons to select a preset number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press 0 and 7.
PRESET NUMBER TUNING
'.¡ ììì !£'., . j . v ; : I 'i.jiVsA’
^ROrx“ ■_ pTiF ! Г АЧЯГЗ ' ВЗМ)
Repeat steps 1 and 2.
No more stations will be stored if a total of 32 stations have
already been stored for all the bands.
NOTE
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
ENGLISH