1 press pwr to turn the unit off, Security lamp, Detaching and attaching the front panel – Aiwa CT-X418 User Manual

Page 5: F @ _______ be? lj, English

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DETACHING AND

ATTACHING THE FRONT

PANEL

Attaching the front panel

You can detach the front panel from the unit and

carry it with you when you leave your car

unattended.

When you carry the front panel out of your car,

use the supplied carring case.
Before detaching the front panel, remove the

cassette to prevent possible damage to the unit.

1

Press PWR to turn the unit off.

2

While supporting the front panel with

one hand, press 1, to release one side

of the panel. Care must be taken not to

drop the panel. It may suddenly eject at
this point.

3

When the front panel is lifted from the

unit, remove it by pulling it away from
the unit.

Security Lamp

When the front panel is detached, you can find an

LED lamp on the front side of the unit. This lamp

is designed to deter theft, and continues to flash

when the car’s ignition is turned off with the front

panel detached. This unit is not equipped with

any other security systems such as a security

alarm, so there are limitations to its effectiveness.

11

1

f @

_______

BE?
LJ

LED lamp

Do NOT touch the connector on the reverse

side of the front panel, as doing so may
contaminate the connector and cause a poor
connection resulting in a malfunction.

ENGLISH

4

Advertising