Aiwa CT-X418 - Manual (Page 9)

To tune in the preset stations
TAPE PLAYBACK
1
Press BAND to select a desired band
from among FM1, FM2, FM3 and AM.
2
Press the desired preset station button.
The number of the pressed preset station
button is displayed next to the frequency
indication.
Active tuning reception control (ATRC)
This unit automatically suppresses FM noise
caused by varying signal strength resulting from
movement of the car.
• The built-in automatic blending circuit mixes the
left and right channel signals according to the
strength of the reception. At the same time, the
high-cut circuit activates to maintain the sound
quality.
• If the reception becomes even weaker, the unit
automatically switches to Monaural mode to
reduce noise.
1
Insert a cassette to start playback.
Playback starts in the direction that the unit
played back previously.
T O O C '
1 I l i i...
►
2
Adjust the volume with +/—.
Press the follotwing buttons to operate tape
transport
To do this Press this button
Eject the cassette*
0
Change the playback
side 01 and [0
simultaneously
Fast-fonArard upper side
of the tape
Rewind lower side of
the tape
E
Rewind upper side of
the tape
Fast-fonward lower side
of the tape
0
Stop fast winding and
resume playback
Q| or 0 lightly**
* When you eject the cassette, the unit switches to
Radio mode.
** Do not press 0] Ot B so may
change the direction of tape transport.
continued
ENGLISH 8