Aiphone Kc-1hrd - Manual (Page 4)

5
TECHNICAL PRECAUTIONS ---------------
Precautions on Operations
• KC-1GRD and KC-1HRD wall-mounted may collect dust.
Clean unit as needed.
• Do not put anything on KC-1GRD or cover KC-1GRD with
cloth, etc. Fire or unit trouble could result.
• KC-1 GRD unit surface becomes warmer when It Is on, but
this is not a malfunction.
• When outside temperature lowers sharply after rain, etc., the
Inside of the camera may fog up slightly, causing a blurry
picture, but this is not a malfunction. Normal operation will be
restored when moisture dissipates.
LCD monitor
• It must be noted in advance that the TFT color LCD panel,
though manufactured with very high precision techniques.
Inevitably has a very small portion of picture elements that
are either steadily lit or not lit at all, which is not considered
a unit malfunction.
• The LCD monitor looks dark In the bright lit area, etc. Adjust
BRIGHT control to high position to increase monitor
luminosity, or reduce ambient lighting.
Before asking for repairs
In case it does not call or communicate properly, check
the followings;
1. If KC-1 GRD power switch Is turned off.
2. If cause of trouble is not found, turn off power switch, and
Contact your installing dealer for repair information.
3. When tint does not come out properly;
• Due to poor lighting on the object at night, there will be
interference in the image. This is not a malfunction.
• When gate or porch light Is fluorescent, the Image or color
may vary. This is not a malfunction.
4. Viewing image on LCD monitor
See the image right in front of the LCD monitor. When
viewed down, the image may look too bright, and when
viewed up, the image may look dim, but this is not a
malfunction.
Cleaning
Clean the KC-1 GRD units with a soft cloth dampened with
neutral household cleanser. Never use any abrasive cleaner
or cloth.
6 SPECIFICATIONS
KC-1 GRD, KC-1HRD
• Power source: DC 24V.
• Consumption: KC-1 GRD: Max. 450mA. 70mA standby.
KC-1HRD: Max. 200mA. 50mA standby.
• Video monitor 4 inch TFT color LCD.
• Power supply: PS-24E (2A).
• Call-in: 4-tone electronic chime & door call-in
• Communication:
LED blinking red.
Simultaneous with handset
• Ambient temperature: 0°C~40°C(32°F~104°F)
• Housing: Fire-retardant ABS plastic
• Color: Snow white
• Dimensions: 195Hx185Wx88D(mm)
7-3/4"H X 7-1/4"W X 3-1/2"D
• Weight: 890g (1.96 lbs.) (approx.)
• Door release: Contact rating: AC 12V, 400mA.
• Wiring: KC-1 GRD ~ KC-DAR: 2 wires (NP)
KC-1GRD/KC-1HRD ~ KC-1SD:
2 wires In loop plus 2 wires In same or
separate-jacketed cable(for power supply).
KC-DAR
• Power source: Max. 22V (approx.) in operation.
DC 12V (approx.) In standby.
Supplied by KC-1 GRD
• Consumption: Max. 350mA (approx.)
4mA (approx.) In standby
• Communication: Simultaneous In open voice
• Picture element: 1/4 inch color CCD
• Image view area: Horizontal 60cm (approx.)
Vertical 111 ~ 235cm (approx.)
at 130cm high (up to unit center)
and at 50cm from camera
2' H, 3' 8" ~ T 9"V at 4' 3" high at 20"
from camera.
• Night viewing: White light projected up to 30cm (1') from
door camera. The background scene
beyond 30cm (1') cannot be seen
• Ambient temperature: - 10°C ~ 60°C(14°F~140°F)
• Housing: Fire-retardant ACS plastic
Color: Gray
• Dimensions: 140Hx105Wx44D(mm)
5-1/2"H X 4-1/8"W X 1-3/4"D
• Weight: 31 Og (0.68 lbs.) (approx.)
Wiring distance
(Diameter) O.65mm0 I.Omme 1.2mm0 22AWG 18AWG 16AWG
•KC-1GRD~KC-DAR 50m 100m 165' 330'
•KC-1GRD~KC-1HRD 50m 100m 165' 330'
(KC-1SD)
•KC-1GRD-PS24 10m 20m 33' 65'
•KC-1GRD-IER-2 50m 100m 165' 330'
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instmctions, may cause harmfrd interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can he determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. • Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of
two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should It become defective
upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make
the final decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the
warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation
of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does
not cover batteries or damage caused by batteries used In connection with the unit.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone.
Aiphone will not be responsible for any costs incurred involving on site service calls.
4*
4-
4*
4*
4-
4-
4*
4*
4-
AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION, BELLEVUE, WA, USA
AIPHONE EUROPE N.V., ANTWERP, BELGIUM
0
KC-1GRD-0/M(E) 0501C
COMMUNICATION SYSTEMS
AIPHONE*
HOME, BUSINESS, INDUSTRY.
Printed in Japan (E)
4
-