Variations to standard installations – Aiphone TB-3F User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VARIATIONS TO STANDARD INSTALLATIONS
Any combination of TB-F series phones and accessories shown on page 2 of this manual can be intermixed to develop a
communication system to meet your requirements. Installation examples below show TB-6F as master station which may be
replaced by either TB-3F or TB-12F.
EXAMPLE NO. 1: TB-F SYSTEM WITH ONE MASTER AND SEVERAL SUBS
1) This example shows six TB-IF phones connected to one TB-6F.
2) Paging system may be added using PB-1 adaptor.
PS-12C
Power Supply
EXAMPLE NO. 2: TB-F SYSTEM WITH TALKBACK PAGING
EQUIPMENT REQUIREMENTS
1) TB-F system shall consist of TB-IF, TB-3F, TB-6F or TB-12F phones.
2) One PS-12A (or PS-12C), one PB-1, one PB-2, one paging amplifier with 70 or 100 volt line and output of less than 50
watt RMS, and appropriate paging speakers as required must be used.
3) Door station may be included in system with paging or talkback paging.
NOTE: * PB-1 and PB-2 paging adaptors must be connected directly to PS-12A (or PS-12C) power supply.
PB-2
PB-1
- 6 -