Step 1 front and rear stabilizers – BodyCraft Tour Trainer Indoor Cycle User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
STEP 1 FRONT AND REAR STABILIZERS
1. Assemble the Tour Trainer on a flat, level surface. Attach the
Front Stabilizer (2) and Rear Stabilizer (3) to the Main Frame
(1) using four Hex Sunken Screws (10), four Spring Washers
(104), and four Washers (11 ). Adjust the Levelers (5)
screwed into the Front and Rear Stabilizers (2 & 3) to ensure
the Tour Trainer is completely stable.
Please tighten horizontal Sunken Screws (10A ) FIRST to
ensure the stability of Front and Rear Stabilizers after all 8 pcs
Sunken Screws ( 10 ) screw in the tube by hand.
Advertising