Installation instructions (continued), Tips, Cautions – Dukane P42 User Manual

Page 18: English, Loading batteries, Handling the remote controller

Advertising
background image

ENGLISH

8

INSTALLATION INSTRUCTIONS (continued)

Loading Batteries

1) Open the battery cover.

• Slide the battery cover towards the arrow mark while

pressing it.

2) Load batteries.

• Load two Size AA batteries included observing the

correct polarities.

3) Close the battery cover.

• Slide back the battery cover towards the arrow mark.

Handling the Remote Controller

• Use the remote controller within about 5 m from front of the

unit’s remote-control sensor and within 30 degrees on both
sides.

With in 30

degrees

With in 30

degrees

About 5m

About 3m

About 3m

SIZE

RGB 2

VOLUME+

VOLUME-

MUTE

MENU

RECALL

RGB 1

VIDEO 2

VIDEO 1

Handling the Remote Controller

• Do not use new and old batteries together. The batteries could

explode or leak, resulting in fires, physical injury, or stains.

• When loading batteries, observe their correct polarities as marked on

the product. If loaded in the wrong direction, the batteries could
explode or leak, resulting in fires, physical injury, or stains.

TIPS

• Do not drop or impact the remote controller.

• Do not splash the remote controller with water or put it on a wet

object to avoid possible failures.

• Before leaving the remote controller out of use for an extended

period of time, remove the batteries from it.

• If the remote controller begins to lack responsiveness, replace the

batteries.

• Strong light such as direct sunlight impinging on the photoreceptor

of the remote control can cause operational failure. Position this unit
to avoid direct contact with such light.

CAUTIONS

Advertising