Dukane P42 - Manual (Page 25)

ENGLISH
15
Resolution Overall display Partial display
Display FULL NORMAL ZOOM
640 X 480 (VGA)
X
Y
800 X 600 (SVGA)
1024 X 768 (XGA)
SXGA
X : Y = 5 : 4
Others
X : Y = 4 : 3
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)
DISPLAY MENU (RGB)
Selected characters Setup hint
DISPLAY AREA
NORMAL ZOOM FULL
Set to FULL to display
images across the screen
for gaining an overview of
the overall images.
AUTO ADJUST *
ADJUST OK?
Adjusts the CLOCK,
PHASE, etc. automatically.
Set to YES. Set to NO.
INTERPOLATION Set to DOUBLE. Set to LINEAR.
Set to DOUBLE to see
characters or images crisp
or to LINEAR to view them
smooth.
WIDE MODE ** Set to OFF. Set to ON.
Only displayed when VGA
(60 Hz) or WIDE VGA
signals are input. Natural
images can be enjoyed
when set to ON when WIDE
VGA signals are input. Set
to OFF when VGA (60 Hz)
signals are input.
DISPLAY INIT.
INITIALIZE?
Clear the user signal preset
data.
Set to YES.
Clears all DISPLAY MENU
adjustment values exept
DISPLAY AREAand exits to
the DISPLAY MENU. Set to NO.
Exits to the DISPLAY
MENU, without clearing
the menu adjustment
values.
RGB
DISPLAY MENU
DISPLAY AREA : NORMAL
AUTO ADJUST
MANUAL ADJUST
INTERPOLATION : LINEAR
WIDE MODE : OFF
DISPLAY INIT.
RETURN
NORMAL
MAIN MENU
PICTURE
SOUND
DISPLAY
FUNCTION
Displays According to Selected DISPLAY AREA (RGB input)
Data area
21
* Depending on the type of signal displayed, displays may not be optimized through
automatic adjustment. Apply MANUAL ADJUST to optimize them.
* 1080/60i signal doesn't exit the display of AUTO ADJUST. Apply MANUAL ADJUST in
this case.
** When WIDE MODE is set to ON, the display area mode becomes FULL and switching of
the size is not possible.
The V.Posi
setting allows
for upward and
downward
scrolling.
16
• Signal processing is carried out for compression (pixel thinning) or zoom, etc. for the above
signal displays.