'da Products PENCAM VOICE - Manual (Page 17)

Self Timer
Press the mode switch until "St" appears on the LCD. Then press the shutter
switch and a 10 second self-timer starts. Every 10 second the camera issues
a short beep. When completing the self-timer, a longer beep sounds, which
indicates that a picture is taken.
Note: The self-timer can't work when the memory of your camera is full.
Change mode to "St"
"St" is displayed
Press SW1 to initiate the self-timer mode
SW1
SW1
Change mode to "Ct"
"Ct" is displayed
Press SW1 to select Continuous mode
Continuous mode
Press the mode switch until "Ct" appears on the LCD. You can take a series
of pictures in quick succession by holding down the shutter switch. The
function stops as you release the shutter switch. If the "Ct" icon
is not
selected within 5 seconds, the LCD reverts back to the remaining number of
the pictures .
Note: Even if the light is insufficient, the continuous mode still works.
However, the pictures you shoot will be too dark or too vague.
@ n I P C o m p a n y