Datamax Allegro 2 - Manual (Page 14)

Getting Started
6 Allegro2
Pause Button: This button allows the operator to stop printing a
run of labels and then restart the job by pressing
the button again. Activation of the button will:
•
Stop the print mechanism when the label
printing is complete.
•
Turn on the pause light.
•
Stop the label counter, but maintain the
count balance.
•
Hold all data in memory.
Pressing the button a second time will:
•
Restart the Printer.
•
Print the balance of labels on the counter
unless interrupted.
•
Turn ‘off’ the pause light.
Pause Light: The pause light will turn on if any of the
following occurs:
•
The pause button is pressed.
•
A print job is canceled with the stop/cancel
button.
•
A fault occurs with the cutter or rewind
option.
Stop/Cancel Button:This button allows the operator to stop and cancel
a run of labels in the process of being printed and
continue on to the next run in the Printer’s buffer.
Feed Button: Pressing this button causes the paper to
automatically advance to the first print position of
the next label. On a new size label, 0 - 2 labels
may feed before registration occurs.