Storage, Servicing, Replacement parts – Desa TD120A User Manual

Page 9: Technical service

Advertising
background image

www.desatech.com

122139-01A

9

rEPLAcEMENT PArTS

Note: Use only original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.

PARTS UNdER WARRANTY

Contact authorized dealers of this product. If
they can’t supply original replacement part(s),
call DESA Heating, LLC at 1-866-672-6040.
When calling DESA Heating, LLC, have
ready:
• your name
• your address
• model and serial numbers of your heater
• how heater was malfunctioning
• purchase date
Usually, we will ask you to return the part to
the factory.

PARTS NOT UNdER WARRANTY

Contact authorized dealers of this product. If
they can’t supply original replacement part(s),
call DESA Heating, LLC at 1-866-672-6040 for
referral information. A list of authorized dealers
can be found by visiting www.desatech.com.
When calling DESA Heating, LLC, have
ready:
• model and serial numbers of your heater
• the replacement part number

TEcHNicAL SErvicE

You may have further questions about installa-
tion, operation, or troubleshooting. If so, con-
tact DESA Heating, LLC at 1-866-672-6040.
When calling please have your model and
serial numbers of your heater ready.
You can also visit DESA Heating, LLC’s web
site at www.desatech.com.

STOrAGE

1. Allow at least 45 minutes for heater to cool

down after using.

2. Disassemble heater in reverse order that

it was assembled.

3. Place all hardware in provided tool bag.
4. Store unit in bag until ready to use again.

SErviciNG

To assure safety, proper function and lon-
gevity of the heater, regular maintenance is
required. The frequency of maintenance will
depend on the usage of the unit. Review the
following concerning the criteria for a properly
functioning heater. Failing to follow proper,
regular maintenance will void warranty.
A hazardous condition may result if a heater
is used that has been modified or is not func-
tioning properly. When the heater is working
properly:
• The flame is contained within the heater.
• The flame is essentially blue with some

yellow tipping.

• There is no strong disagreeable odor, eye

burning or other physical discomfort.

• There is no smoke or soot internal or ex-

ternal to the heater.

• If your heater will not light or stay lit, contact

a qualified service person.

The parts lists and wiring diagram show
the heater as it was constructed. Do not
use a heater which is different from that
shown. In this regard, use only the hose,
regulator and cylinder connection fitting
(called a POL fitting) supplied with the heater.
IMPORTANT: Do not use alternates. For this
heater, the regulator must be set as shown in
Specifications, page 2. If there is any uncertainty
about the regulator setting, have it checked.

Advertising