Electronic speed control - if equipped, To activate, To set at a desired speed – Dodge 2009 Nitro User Manual

Page 137

Advertising
background image

ELECTRONIC SPEED CONTROL — IF EQUIPPED

When engaged, the Electronic Speed Control takes over
the accelerator operation at speeds greater than 25 mph
(40 km/h).

The Electronic Speed Control lever is located on the right
side of the steering wheel.

To Activate

Push the ON/OFF button. The CRUISE indicator in the
instrument cluster will illuminate. To turn the system off,
push the ON/OFF button a second time. The CRUISE
indicator will turn off. The system should be turned off
when not in use.

WARNING!

Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system off when you are not using it.

To Set At A Desired Speed

When the vehicle has reached the desired speed, press
down on the lever and release. Release the accelerator
and the vehicle will operate at the selected speed.

Electronic Speed Control Lever

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

135

3

Advertising
This manual is related to the following products: