Rear tail, stop, turn signal, and backup lights – Dodge 2009 Nitro User Manual
Page 408
Advertising
![background image](/manuals/72972/408/background.png)
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
Rear Tail, Stop, Turn Signal, and Backup Lights
1. Open the lift gate.
2. Remove the two push pins.
3. Pull lamp straight back and disconnect electrical con-
nection.
4. Remove the two screws attaching the backplate to the
lamp assembly.
5. Pull the backplate straight back from the lamp housing.
Push Pins
406
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: