Pc setting, Clock, Autotune – Audiovox FP2000 User Manual
Page 31: Audiotox, Electronics corp
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AUDIOTOX
ELECTRONICS CORP.
PC Setting
Dii
Load Default
Press menu, select Phase, then set the
phase functions
Note: Adjust if screen is not clear
Clock
Press menu, select Clock, then set your
current time
Press menu, select, then set the setting to
default
note: if screen shows 'No Signals" this means that the
PC(VGA) signals has not yet been connected.
Autotune
Auto adjust the clock, phase, H-position and
V-position of the display to make the monitor
have the best efficiency.
Press CH A button on the front control panel
for 3 seconds till you release it, this monitor
will make auto adjustment.
«moHTNcss
CONTRAST
NOR POSmONI
VEfLPOSmON