Audiovox FP2000 - Manual (Page 33)

AUDIOTOX*
ELECTRONICS CORP.
Troubleshooting
You may have problems that can be fixed with a few minor adjustments. Look for the type of
problem you are having below and then apply the suggestions to get your TV going again.
m
Picture with no sound
■ Check if you have accidentally pressed the "mute" button
■ Check other channels if the same problem exist. If other
channels are fine, then problem is with the TV program you
are viewing. This shouldn't be a concern
■ Verify all connections are firmly attached
■ Connect cable to another TV
■ If all checks fail, please contact our serviceman
Sound with no picture
■ Check if main power is switched on
■ Check brightness and contrast level to see if they have
been tuned to the minimum level thus making the screen dark
■ Unplug the cable and re-plug it in after two minutes
■ Check if you have accidentally pressed the “mute" button
■ Connect cable to another TV
No Picture No Sound
■ Check main power source
■ Check other TV channels. If they are okay, problem is just
with the TV program you are viewing
■ Press the TVA/IDEO/PC button on the remote or on the top of
the unit to get to the desired display option
■ If you are using outdoor antenna, please check your
connections
■ Please check if your power cord is connected properly,
it may be loose
■ Switch off main power, disconnect cable. Reconnect cable
after two minutes rest then switch on the main power
■ Check if the antenna or cable are well connected
■ Check your Remote Control
■ Check power adapter and power cord if they have been
damaged
■ Connect cable to another TV
■ If all fails, please contact with serviceman immediately
m
!