Danby DBD5L - Manual (Page 16)

OPERATING THE BEVERAGE DISPENSER
Using The Dispensing Tap
You can begin dispensing your beverage immediately after the 5 liter mini keg or the
container has been connected to the dispenser. However, it is recommended that you
wait until the beverage has reached the desired set temperature.
Beer, in particular, can foam excessively if the temperature is too high.
NOTE: Do not place glasses on top of the dispenser. It is an uneven surface, so
glasses may fall.
1. Take a clean glass and hold it at a slight 45° degree angle directly under the tap
NOTE: To ensure proper cleanliness, make sure the tap is not immersed in the
beverage being dispensed into the glass. Beer residue on the tap can impair foam
formation.
2. Pull the tap handle all the way down and fill the glass. Dispensing with the tap
partially open can cause excessive foam.
3. Gently release the tap handle to stop dispensing.
Shelf Life Of 5 Liter Mini Kegs and Container
Opened 5 liter mini kegs have a shelf life of 24 hours unless otherwise stated by your
beverage manufacturer on the keg. Read all instructions on the keg carefully, or if in
doubt, contact the manufacturer directly. Do not keep an opened 5 liter mini keg in the
dispenser (even when switched ON) longer than 24 hours , for which you are to follow
their noted shelf life instructions. After that length of time, the beverage will go flat.
Do not store beverages in the beverage container longer than 24 hours.
Always leave the dispenser switched ON when storing a mini keg or the beverage
container inside the appliance. This ensures proper cooling.
16