Danby DBD5L - Manual (Page 8)

SETTING UP YOUR BEVERAGE DISPENSER
DISPOSAL OF
PACKAGING
WE CARE ABOUT THE
ENVIRONMENT
How the Beverage Dispenser Works.
This appliance is a beverage cooler and dispenser. Standard
5 liter mini kegs, and the Beverage Container are cooled
to the desired temperature in the cooling compartment
of the appliance.
8
• Ensure that all included
accessories are present and in
good condition (see ‘Parts &
Accessories” on page 7).
• Make sure you have read and
understood all important safety
information on pages 4-5.
With Standard 5 Liter Mini Kegs & 5L Beverage Container
The beverage dispenser is compatible with different adapters that work with standard 5
liter mini kegs and the provided beverage container. These adapters ensure that the
kegs and container as specified in this manual can be used with the unit.
This appliance uses compressed air to control the pressure of the standard mini kegs
or the beverage container which allows it to dispense the beverage. Air is pumped into
the standard mini keg or the container to force the beverage out and into your glass.
Important Notice: Sanitation
Handling mini kegs, containers, tubes, adapters, and pipes which come in contact with beverages
requires special care and attention to sanitation. It is important to clean the tubes, adapters, pipes,
and the beverage dispenser itself thoroughly before and after each use.
Please comply with the following principles:
• Clean all parts of the appliance that come in contact with beverages thoroughly after
each use (refer to “Care and Cleaning” on page 18).
• If in doubt, clean all parts before using.
• Clean all parts when changing a mini keg or the container.
IMPORTANT
• Please dispose of all old and unused appliances in
accordance with your local ordinances.