Dell PowerConnect 2016 - Manual (Page 13)

Over view 13
FILE LOCATION: C:\A-2003 Working Folder\All PowerConnect\E-Doc Posts\Eng UG rev\7H905ch.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 6 / 3 / 0 3
Front Panel Indicators
The LEDs on the front panel display the following information:
• Status of the power supply
• Connection speed of either 10-Mbps or 100-Mbps
• Data activity on the segment
• Full- or half-duplex operation mode
PowerConnect 2024
Power LED
• Green — The unit is on and ready for use.
• Off — The unit is off.
Link/Activity (LNK/ACT) LED
• Green — 10-Mbps link pulses are detected.
• Blinking Green — A 10-Mbps connection is established and data is
being transmitted or received on the port.
• Solid Orange — 100-Mbps IDLE symbols are detected.
• Blinking Orange — A 100-Mbps connection is established and data is
being transmitted or received on the port.
• Off — No link is established.