Dell MH941 User Manual
Page 7
Advertising
4
Figure 1
Connecting the MH941 Hand-Held Scanner to the
Decoder/Controller
In order for the MH941 scanner to maintain compliance with applicable
standards, all circuits connected to the scanner (Example: power supply, host
system, etc.) must meet the requirements for SELV (Safety Extra Low Voltage)
according to EN60950.
Since there are many different types of decoders, refer to your decoder’s
documentation to connect the decoder to your host system. For a listing of the
cable pin assignments for the MH941 scanner, refer to the section MH941 Scan
Head Pin Assignments pages 22 and 23.
Advertising