3DLABS Oxygen GVX1 Pro User Manual
Page 2
3Dlabs Graphics Accelerator Card User's Manual
ii
Copyright 2000 by 3Dlabs, Inc.
3Dlabs, GLINT and Permedia are registered trademarks, and Oxygen and
PowerThreads are trademarks of 3Dlabs, Inc. or 3Dlabs Inc. Ltd. Pentium is a
registered trademark of Intel. OpenGL is a registered trademark of Silicon Graphics,
Inc. Soft Engine is a trademark of Vibrant Graphics, Inc. AutoCAD is a registered
trademark of AutoDesk Inc. Colorific is a registered trademark of E-Color, Inc.
Microsoft, Windows NT, Windows 2000, Windows Me are registered trademarks of the
Microsoft Corporation. Athlon and 3DNow! are registered trademarks of AMD. All other
trademarks and registered trademarks are the property of their respective holders.
Caution:
Changes or modifications to your 3Dlabs Graphics Accelerator Card not
expressly approved by 3Dlabs, Inc. voids the user’s warranty.
FCC Notice:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy.
If product is not installed and used in accordance with the instruction manual, it may
cause harmful interference to radio communications; however, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Re-orient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
4. Consult 3Dlabs or an experienced radio/TV technician for assistance.
Compliance with FCC Rules requires that a shielded cable be used to connect to other
equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus meets all the requirements of the Canadian
Interference- Causing Equipment Regulations. Cet appareil numérique de la classe B
respecte toutes les exigences du Règlement sur le material brouilleur du Canada.
3Dlabs, Inc. makes no representation that the use of its products in the manner
described in this publication will not infringe on existing or future patent rights, nor
do descriptions contained in this publication imply the granting of licenses to make,
use, or sell equipment or software in accordance with the description.
Specifications Subject to Change With Notice
P/N 62-000007-001, Final