3xLOGIC VISIX Camera User Manual
Page 6
Visit our webpage for more info at:
3xLOGIC Inc.
Doc# 13111317
Page 6 of 10
3.6 Set/Confirm the Sub-Stream Settings for your VISIX IP camera
In bottom portion of the Advanced Options section of the main screen is the Sub-
Stream settings.
Resolution – CIF (352x240) Recommended setting.
Frames Per Second (FPS) – Sub-stream viewing typically requires a faster frame
rate. (e.g. 20 FPS)
If all of your Settings are acceptable, click on Save Settings to save your settings to
the camera you just setup.
If you have VIGIL Video Management System software installed, you also need to click
on Save to VIGIL to ensure your camera settings are saved to the VIGIL Server System
as well.
Repeat the process from Section 3.3 Confirm/Change the IP Address assigned to
your VISIX IP camera and forward for each detected VISIX IP camera you would like
displayed in VIGIL Server.