Accutone A20 - Manual (Page 5)

part a. getting comfortable.
Hooking all the parts together!
A.2
Hooking all the parts together!
A.2
part a. getting comfortable. 7 6
A.2.4 Inserting Batteries
Slightly depress the Battery Compartment Door (4) and slide it
outwards. Install batteries with polarities according to the battery diagram
inside the compartment. Two UM-3 (AA) batteries are required. Alkaline
batteries are recommended.
A.2.5 External DC Supply
The unit provides the choice of using an external DC supply instead of
batteries. You can connect an AC Adaptor to the External DC Supply Jack (I).
When purchasing an AC adaptor, make sure the output voltage is 9V DC,
and current is 500mA, but we recommend you contact your local dealer for
information.
A.2.6 Headset Hanger Components
Along with your A20 Omega amplifier, you should be able to find the
following 3 pieces of components for the headset hanger. There are one
plastic and two metal components.
I II III
A.2.7 Hanger Installation Part 1
Insert the metal piece (I) first into the bottom of the A20 Omega amplifier as
illustrated, make sure that it fits perfectly into the track, you should be able
to feel a click, which means the metal is fastened to the plastic bottom. Then,
gently turn the metal piece inwards towards the amplifier so that the entire
piece is fastened to the bottom, as shown below.
I
4
A
lka
lin
e
A
A
A
lka
lin
e
A
A
2 x AA Batteries
1
connection & preparations. connection & preparations.
*AC Adaptor not included!