Accutone A20 - Manual (Page 6)

Hooking all the parts together!
A.2
part a. getting comfortable.
A.2.8 Hanger Installation Part 2
Upon completion of the above, attach the
remaining metal piece (II) to the plastic
piece (III) as shown on the right. Make sure
that the hanging curves (A) and the cord
winders (B) are facing opposite directions.
The hanging curves (A) will be where you
hang your headset, and the cord winders
(B) are designed for tangling your long
headset cords around it, for tidiness and
space-saving.
A.2.9 Hanger Installation Part 3
The final step is to place the assembled
pieces (II) & (III) on top of the metal
piece (I), which should already be
fastened to the bottom of the amplifier
box. Gently insert the metal rods (I)
into the holes at the bottom of the
plastic piece (III) until resistance.
T h i s w i l l c o m p l e t e t h e s i m p l e
installation of the hanger, from now on,
you can enjoy the convenience of
hanging your headset neatly with this
new feature of the A20 Omega.
II
III
A
B
Feature Highlight!
8
I
II
III
9
Part B. Begin to Operate
B.1 Operating the Unit.
B.2 Troubleshooting.
begin to operate. connection & preparations.