Denon AVR-486 - Manual (Page 20)

ENGLISH
17
System Setup System Setup
ENGLISH
Page Default settings System Setup
System setup items and default values (set upon shipment from the factory)
1
Speaker
Configuration
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
Front Sp.
Large
Center Sp. Surround Sp. Subwoofer
Small Small Yes
Surround Back
Sp.
Small / 2sp
Subwoofer
Mode This selects the subwoofer speaker for playing deep bass
signals.
3 Subwoofer mode = Normal
12, 13
2 Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
14
Front
L & R
Center
Surround
L & R
Subwoofer
12 ft 12 ft 10 ft 12 ft
Surround Back
L & R
10 ft
13, 14
16
Digital In
Assignment This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD AUX DVD / VDP
COAXIAL1 COAXIAL2 OPTICAL
6
Crossover
Frequency Sets the frequency (Hz) below which the bass sound of
the various speakers is to be output from the subwoofer.
4 80 Hz 14
5 Test Tone
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects. Front
L & R
Center
Surround
L & R
Subwoofer
0 dB 0 dB 0 dB 0 dB
Surround Back
L & R
0 dB
15
Power Amp
Assignment Sets this to switch the surround back channel’s power
amplifier for ZONE2 use.
Surround Back 16 9
7
Auto
Surround
Mode
Auto surround mode function setting. Auto Surround Mode = ON 16
Ext. In SW
Level
Sets the Ext. In Subwoofer channel playback level. Ext. In SW Level = +15 dB 16 8