Acrosser ANR-IH61N1/A/B - Manual (Page 14)

2.1.7. Other Connector
JP2
(For LAN1/LAN2 Bypass
Function Select.).
PIN Function
1-2 Forced Normal (Default)
2-3 Controlled By CPLD
Open Forced Bypass
CPLD1
For CPLD Firmware
Update
PIN Signal PIN Signal
1 3VDUAL 2 G_TDO
3 G_TDI 4 NC
5 NC 6 G_TMS
7 GND 8 G_TCK
JP4
(For LAN3/LAN4 Bypass Function
Select.).
LCM1 LCM signal connector
PIN Function
1-2 Forced Normal (Default)
2-3 Controlled By CPLD
Ope
n
Forced Bypass
PIN Signal PIN Signal
1 3VDUAL 2 G_TDO
3 G_TDI 4 NC
5 NC 6 G_TMS
7 GND 8 G_TCK
RTC1 CMOS Backup Battery:. LPC1
LPC Header For Port’80
Debug
An onboard battery saves the CMOS
memory to keep the BIOS information
stays on even after disconnected
your system with power source. Nevertheless,
this backup battery exhausts after
some five years.
PIN Signal PIN Signal
1 33MHz 2 LAD1
3 Reset 4 LAD0
5 FRAME# 6 VCC3
7 LAD3 8 GND
9 LAD2 10 GND
14